SAFFIRE-III
PSI-100PreventionSpacecraft Fire Experiment-III
Objectives
- determine how rapidly a large scale fire grows in low-gravity
- investigate the low-g flammability limits compared to those obtained in NASA’s normal gravity material flammability screening test
The Saffire-III experiments were performed on the Orbital Science’s Cygnus resupply vehicle after it deberthed from the ISS. As a follow on to the Saffire 1 investigation, the Saffire III investigation also used SIBAL as the sample material. However, the experiments were conducted at a flow velocity of 30 cm/s compared to 20 cm/s during Saffire I. The flow was either concurrent or opposed. Once the sample was ignited flame images were captured using two cameras. In addition, thermocouples provided flow, flame, and plume temperatures, two radiometers recorded flame radiation, solid state sensors were used to measure pressure, CO2 and O2 mole faction, and two anemometer tracked flow velocity. All data was compressed, and subsequently downlinked.
Conditions
| Parameter | Tested value or range | Unit |
|---|---|---|
| Oxygen | – | % by volume |
| Pressure | – | psi |
| Pressure | – | kPa |
| Airflow | 30 | cm/s |
| Gravity | Microgravity | |
| Diluents | – | |
| Fuel phase | Solid | |
| Fuels | SIBAL cloth | |
| Sample geometry | planar | |
| Sample size | 0.94 meters long and 0.4 meters wide | as stated |
| Hardware | Other | |
| Platform | ISS | |
| Years | 2017 |
A dash means the sources do not state the value.
Variables varied
- flow direction
Variables held fixed
- flow velocity
- fuel
Sensors
- thermocouples
- radiometers
- solid state sensors
- anemometers
- cameras
Findings (0)
No findings are recorded for this investigation.
Fire safety relevance
The overall objective of this project is to reduce the uncertainty and risk associated with the design of spacecraft fire safety systems for NASA’s exploration missions. This is accomplished by defining, developing, and conducting experiments that address gaps in spacecraft fire safety knowledge and capabilities identified by NASA’s Fire Safety System Maturation Team.
Tests (2)
| Test | Sample | Fuel | Sample geometry | O2 (%) | Pressure (psi) | Airflow (cm/s) | Diluent | Outcome | Spread rate (mm/s) | Notes |
|---|---|---|---|---|---|---|---|---|---|---|
| PSI-100-T1 | S1 | SIBAL Fabric | – | – | – | 30 | – | Not stated | – | Direction: Concurrent, Camera 1: S1C1, Camera 2: S1C2, Thickness: .33 cm, Length: 94 cm, Width: 40.6 cm |
| PSI-100-T2 | S2 | SIBAL Fabric | – | – | – | 30 | – | Not stated | – | Direction: Opposed, Camera 1: S2C1, Camera 2: S2C2, Thickness: .33 cm, Length: 94 cm, Width: 40.6 cm |