ACME s-Flame
PSI-23Needs reviewAdvanced Combustion via Microgravity Experiments-Structure and Response of Spherical Diffusion Flames
Needs review: this record is flagged for a manual check. Confirm values against the linked sources before relying on them.
Objectives
- A series of experiments is proposed with the following specific objectives, in both soot-free and sooty flames, to compare with detailed computational simulation to assess transport properties and detailed chemical kinetics (including chemiluminescence): Objective A. Measure and characterize the transient structure (such as temperature and species distribution) of diffusion flames established at initially non-steady, spherical flame structures for mixtures of different H2/CH4/diluent ratios (soot-free) and different C2H4/diluent ratios (sooty), for different flow rates. Objective B. Determine the quasi-steady convective/chemical-kinetic extinction limits (low system Damköhler numbers) and radiative/chemical-kinetic extinction limits (high system Damköhler numbers) for mixtures of different H2/CH4/diluent ratios (soot-free) and different C2H4/diluent ratios (sooty). Objective C. Determine the existence (for different Zeldovich number, Ze), onset (as a function Da), and nature (i.e. mode, frequency, amplitude) of pulsating instabilities theoretically predicted to occur in transient spherical diffusion flames using fuel/diluent mixtures that are above a critical Lewis number.
A series of experiments is proposed in which mixtures of various gaseous fuels and diluents will be issued into an oxidizing environment through a spherical porous burner and ignited to obtain, nominally, a spherical, one-dimensional stabilized flame. Synchronized measurements are to be made including spectrally resolved images, flame and burner temperatures, radiative flux measurements, and system operating conditions (including reactant flow rates, ambient temperatures, pressures and acceleration levels, etc.). These data are to be used for comparisons of flame behavior and structure with detailed numerical simulations of the flames. Conventional gaseous fuels including hydrogen, methane, and ethylene will be used. Hydrogen is the simplest fuel and its reaction mechanism is also reasonably established. Methane is the simplest hydrocarbon and extensive studies have been conducted on its combustion chemistry. Ethylene is a typical sooty fuel and is also an important intermediate for the oxidation of higher hydrocarbons. Diluents mixed with fuel are to include nitrogen and helium to adjust mixture diffusivities, and carbon dioxide to influence flame radiation characteristics.
Conditions
| Parameter | Tested value or range | Unit |
|---|---|---|
| Oxygen | – | % by volume |
| Pressure | – | psi |
| Pressure | – | kPa |
| Airflow | – | cm/s |
| Gravity | Microgravity | |
| Diluents | – | |
| Fuel phase | – | |
| Fuels | methane, ethylene, hydrogen | |
| Sample geometry | – | |
| Sample size | – | as stated |
| Hardware | CIR | |
| Platform | ISS | |
| Years | 2015-2019 |
A dash means the sources do not state the value.
Variables varied
None recorded.
Variables held fixed
None recorded.
Sensors
None recorded.
Findings (0)
No findings are recorded for this investigation.
Tests (0)
No individual tests recorded