DAFT / DAFT-2
PSI-47DetectionNeeds reviewDust and Aerosol Measurement Feasibility Test / Dust and Aerosol Measurement Feasibility Test-2
Needs review: this record is flagged for a manual check. Confirm values against the linked sources before relying on them.
Objectives
- The focus of DAFT / DAFT-2 was to mitigate the risk for the Smoke Aerosol Measurement Experiment (SAME). SAME relied on a commercially available condensate nuclei counter, the TSI P-Trak, to quantify smoke aerosols in a microgravity environment, however there were concerns that th P-Trak would not be reliable in microgravity as it relies on gravity to recycle isopropyl alcohol used in the measurement process. DAFT / DAFT-2 tests that a modified P-Trak particulate counter would be accurate in microgravity.
- Summarized objectives include: 1) Demonstrate the Functionality of the Modified TSI P-Trak in Microgravity 2) Compare the TSI P-Trak Performance against the DustTrak control 3) Create and Analyze Aerosol Standards in Microgravity 4) Ensure the reliability of future aerosol experiments
The experimental approach consists of the following components: 1) Modification of Instrumentation: TSI P-Trak was modified for use in microgravity by redesigning the condenser tube to use capillary forces for recycling isopropyl alcohol and removing the mercury switch responsible for detecting instrument orientation. 2) Aerosol Generation: Arizona Red Dust (ARD) was chosen as an aerosol standard due to its ease of dispersion. The ARD was aerosolized with GN2 to create particle samples. The aerosol was contained within 15-liter Mylar bags. 3) On-Orbit Testing: The modified P-Trak gathered data from counting aerosol particles and these data were compared to the DustTrak CNC specifically designed to work in microgravity.
Conditions
| Parameter | Tested value or range | Unit |
|---|---|---|
| Oxygen | – | % by volume |
| Pressure | – | psi |
| Pressure | – | kPa |
| Airflow | – | cm/s |
| Gravity | Microgravity | |
| Diluents | – | |
| Fuel phase | – | |
| Fuels | – | |
| Sample geometry | – | |
| Sample size | – | as stated |
| Hardware | Other | |
| Platform | ISS | |
| Years | 2003-2009 |
A dash means the sources do not state the value.
Variables varied
None recorded.
Variables held fixed
None recorded.
Sensors
- P-Trak
- DustTrak
Findings (1)
Key findings
DAFT session D1 sampled Arizona Road Dust aerosol near Express rack 4 with a modified P-Trak. Session D2 sampled separated Velcro and nearby air with a DustTrak.
Tests (2)
| Test | Sample | Fuel | Sample geometry | O2 (%) | Pressure (psi) | Airflow (cm/s) | Diluent | Outcome | Spread rate (mm/s) | Notes |
|---|---|---|---|---|---|---|---|---|---|---|
| PSI-47-T1 | D1 | – | – | – | – | – | – | Not stated | – | GMT 54 (2005); Contained the modified P-Trak with Alcohol Wick and batteries; Arizona Road Dust (ARD Fine) in combination with ISS GN2 to create an aerosol for measurement purposes.; Sampled air near Express rack 4 |
| PSI-47-T2 | D2 | – | – | – | – | – | – | Not stated | – | GMT 63 (2005); Contained DustTrak and batteries; Arizona Road Dust (ARD Fine) in combination with ISS GN2 to create an aerosol for measurement purposes.; Sampled separated Velcro and the air near Port rack 6 and in Node 1 |